Moulding Processes
The four main moulding processes are similar in that they all produce a composite moulding incorporating a resin matrix and glass fibres. Our most commonly used resin type is Polyester, and it may be modified in its liquid state to give various specific properties, such as reduced shrinkage or flame retardancy. Phenolic or epoxy resins may also be used to achieve specific properties, such as low smoke emission or high strength composites.
During the moulding process, the resin is converted from a liquid into a solid polymer, encapsulating the glass fibres to form a composite structure. Most mouldings produced have a polyester gel coat surface, which may be high gloss, mat, or sand-able for paint preparation. Depending on geometry, gel coats can be textured to enhance the aesthetics of the moulding. Post moulding operations would include, trimming, drilling, assembly, and in some cases painting. Trimming and drilling may be either manual or robotic.
Medical Covers
Industrial Machine Covers